|Pitch:||1/1.27/2/2.54/3.96/5.08mm||Materials:||Contact: Brass Or Copper Alloy Insulator: LCP+30%G.F, UL94V-0 Rated|
|Type:||Right Angle, Through Hole Mounting||Number Of Contacts:||6-64 Pins|
|Contact Plating:||Au Or S N Over 50µ Nickel||Operation Temperature:||-40 To +105°C|
SMT Shrouded Header Connector,
12pin Shrouded Header Connector,
Shrouded 12 pin header connector
2.54mm double row 12pin SMT box header connector ejector header
Ejector header connector is one of many connector types. It is not only a European type connector, but also a variety of connector classified according to the actual use. Because its shape is similar to horns, it is called ejector header connector. Ejector header connector is a very simple internal wiring equipment.
|Name||Shrouded Header Connector|
|Insulator Flammability||UL 94V-0|
|Contact Resistance(max)||30m ohm Max|
|Operating Voltage||60V AC/DC|
|Insulation Resistance(min)||1000M ohm Min at DC 500V|
|Contact materials||Gold/Tin plating|
|Contact Plated||Tin or gold over nickel|
|Product name: Shrouded Header Connector|
|1. Product features: high temperature resistant to high voltage electrical conductivity|
|2. Product material: PA9T/LCP/PBT, plating surface treatment: gold-plated or tin plating|
|3. Scope of application: Mainly suitable for data communication and electronic equipment and welding on the PCB board, connected to the corresponding specification of IDC ribbon cable and the other circuit designers need to circuit. And if current usually transmission control signal|
How to use Shrouded header connector?
Ejector header connector usually needs to pay attention to the insertion direction, perpendicular to the insertion direction and inclination.
1. Insertion direction: when the connector is fully inserted to u = 14.2, the specified contact resistance shall be ensured.
2. Perpendicular to the insertion direction: if the printed board or fixed board mounted connector is floating mounted, the design of free and fixed board mounted connector shall provide at least 1mm adjustable displacement.
3. Inclination: the design of free and fixed plate mounted connectors allows inclination error, which is ± 4 ° in longitudinal direction and ± 4 ° in transverse direction.
Contact Person: Tina
Tel: 86 13711847246