Customized 2.0mm Double Rows 2*9Pin Bent Needles One-Stop Gold Plating USB PCB Connector Accessory Brass Male Pin Header

Highlight

• Multi‑form customization: Straight pin / Bent right‑angle pin / SMT surface‑mount styles; plastic housing height customizable per PCB stack‑up requirement
• Ready‑for‑SMT option: Supports pick‑and‑place suction cap for automatic chip mounter
• Tape & Reel / Tube packaging optional, directly compatible with SMT production line
• One‑stop gold plating service, adjustable gold thickness for signal‑level / high‑reliability scenarios
• Variable pin count extendable beyond 2×9P for variant project iteration

Product Description

Cross‑Reference & Alternative Replacement

Mechanically & electrically compatible with mainstream 2.0 mm dual‑row right‑angle pin header series from Molex, JAE, JST, Amphenol.

Note: Not original brand parts; verify footprint and mating dimension against your gerber & mating receptacle before mass use. Send your target OEM part number, we can provide direct cross‑verification.

Product Feature

1. Brass pins with integrated one‑stop gold plating, stable signal transmission, anti‑oxidation
2. Right‑angle bent‑needle design, saves vertical PCB space for compact enclosure layout
3. Multiple housing height & pin‑form options, adapt to different board‑to‑board clearance
4. SMT suction cap available, no secondary fixture needed for automatic mounting
5. Strict dimensional consistency, low‑tolerance pin alignment, good mating‑fit with female header

Product Advantage

• Engineer‑oriented customization: Adjust pin length, plastic height, plating thickness without a new mold for most variants
• Dual packaging solution: Tube / Tape & Reel, supports manual assembly and fully‑automatic SMT line
• Reliable one‑stop plating, avoiding partial‑plating hidden risks
• Cost‑effective alternative for high‑cost imported equivalents, shortening procurement lead time
• Full in‑house production: stamping‑molding‑plating‑assembly‑packaging under one factory

Application 

• Industrial control PCB modules
• IoT & edge computing hardware
• Medical device signal interconnection
• Consumer electronics internal board‑to‑board connection
• Instrumentation, sensor modules
• Automotive non‑safety signal circuits

Packaging Method

1. Tube (Tube packing): For manual assembly/prototype trial, anti‑static tube packaging
2. Tape & Reel: SMT‑compatible reel packing, direct feeding for automatic pick‑and‑place machine, no extra pre‑processing required.

Reminder: Specify packaging type when placing order; wrong packaging will block your SMT‑line production.

Lead Time

• Samples: 3 working days
• Mass‑production orders: 1‑3 weeks (subject to customization complexity & material stock)

Factory Certification & Custom Service

• Certifications: ISO9001, RoHS, REACH
• MOQ: Standard item 1000 pcs; custom version negotiable
• Sample Policy: Support free samples / fast sample output; customer only bears freight cost
• ODM/OEM available: Custom pin count, pin shape, housing height, plating thickness, logo marking

Customer Selection Guide

1. Confirm pitch 2.0 mm, rows & PIN, mating female header dimension
2. Confirm mounting method: Through‑hole bent pin or SMT; if SMT is required, select suction‑cap option
3. Confirm packaging: Choose Tape & Reel if you use an automatic SMT machine; select Tube for manual assembly
4. Define gold plating thickness based on working environment: Higher gold thickness for high‑vibration / humid‑corrosion environment
5. Confirm PCB footprint and reflow temperature profile match housing temperature resistance
6. Request samples for soldering & mating test before mass production

Tip: Send your Gerber, 2D drawing or competitor part number, our engineering team can pre‑check feasibility for you

FAQ

Q: What's your MOQ?

A: Our MOQ usually comes to 1000 pcs, but we accept small order quantities for testing.

Q: Can I visit your factory?

A: Welcome to visit our factory, and we will show you our professional production process. We hope we can have long-term cooperation with you.

Q: What's your sample time? What's your delivery time?

A: 7 days for samples, and 15-20 days for mass production. It depends on the quantity.

Q: How do I inspect my goods? 

A: You can inspect by visiting the factory, or ask a third party to inspect, or by picture inspection.

Q: How much does it cost to ship to my country?

A: The freight will be quoted by the freight company based on your Gross Weight and CBM.

Q: How do I know if you ship out my order?

A: The tracking number(DHL, UPS, FedEx, TNT, EMS, etc.), Air Waybill, or B/L by Sea will be sent to you as soon as your goods are shipped out. We also follow up on the delivery and keep you informed. 

Q: Can I make personalized/customized products?

 A: Sure, just send us your drawing or sample.