2.54mm Pitch H3.0 Right Angle USB Pin Header Connector 10P Brass Machine Double Rows for PCB 2X5P 3A Rated Connectors

2.54mm Pitch H3.0 Right Angle USB Pin Header Connector 10P Brass Machine Double Rows for PCB 2X5P 3A Rated Connectors

Highlight

✅ Multi‑form factor customization: Straight / Right‑angle / SMT mounting available; custom insulator plastic height upon request

✅ SMT auto‑mount enabled: Supports pick‑up Cap (suction cap) for robot pick‑and‑place 

✅ Tape & Reel & Tube packaging options, ready for SMT assembly line

✅ Brass precision‑machined contacts, rated 3A, 2×5P (10-pin), 2.54 mm pitch, H3.0 insulator height

✅ RoHS compliant, UL94V‑0 housing, multiple plating options

✅ Free samples supported, fast sample output

Product Description

Cross‑Reference & Alternative Replacement

Note: Verify footprint & dimension before drop‑in replacement; send us your target part number for 1‑on‑1 verification.

• Interchangeable with Molex KK254 series, TE AMPMODU 2.54mm dual‑row right‑angle pin header, JAE equivalent 2.54 pitch 2×5P right‑angle header series
• Matches standard Dupont female socket housing for USB & board‑to‑board interconnection
• Custom pin length / plastic height to match your original brand footprint

Product Feature

1. Precision-machined brass pins, stable contact, low contact resistance
2. Multiple mounting forms: Straight / Right‑angle / SMT, plastic height customizable for stack‑up PCB design
3. SMT‑capable suction cap available, fits automated pick‑and‑place robot
4. Supports Tube / Tape & Reel packaging for different production workflows
5. UL94V‑0 flame‑retardant insulator, stable performance under a wide temperature range
6. Multiple plating choices (tin / selective gold) to balance cost & anti‑oxidation requirements

Product Advantage

1. Manufacturing‑friendly: Tape & Reel ready, directly feed to SMT assembly line, no secondary manual repacking needed
2. High flexibility: Do not change your PCB layout; adjust pin length / plastic height by customization
3. Cost‑effective alternative to Molex / TE / JAE, same mechanical‑electrical performance, shorter lead‑time
4. Strict QC for pin perpendicularity & dimension tolerance; avoid soldering offset & poor contact risk
5. Free samples available, fast prototype validation for engineer pre‑verification

Application 

• USB‑related internal PCB interconnection
• Industrial control board, IoT module, sensor board
• Consumer electronics, embedded device, development board
• Instrument & meter, power supply module
• Medical auxiliary equipment, communication equipment

Packaging Method

1. Tube packaging: For manual assembly / small‑batch prototype; not suitable for SMT automatic pick‑and‑place
2. Tape & Reel (with pick‑up Cap): Directly compatible with SMT automatic pick‑and‑place machine, mass production preferred; Reel size can follow customer requirement (7‑inch /13‑inch etc.)

 Engineer reminder: If you need auto‑SMT production, please explicitly specify “Tape & Reel with suction Cap” when placing order.

Lead Time

• Samples: 3 working days
• Mass‑production orders: 1‑3 weeks (subject to customization complexity & material stock)

Factory Certification & Custom Service

• Factory certification: ISO9001, IATF16949 optional; RoHS‑2.0, REACH compliant
• Sample policy: Support free samples / fast sample output
• MOQ: Standard part low MOQ; customized parts MOQ depends on tooling & dimensions
• Custom service: Modify mounting type (Straight / RA / SMT), insulator plastic height, pin length, plating thickness, missing‑pin design, special reel size. Send your drawing or spec sheet for our engineering evaluation.

Customer Selection Guide

1. Confirm pitch: 2.54 mm, pin count:2×5P(10P), insulator height H=3.0 mm
2. Confirm mounting type: Right‑angle through‑hole(default), or switch to Straight / SMT version
3. Select plating: Tin for general signal; selective gold for high‑vibration / long‑life‑cycle application
4. Packaging selection: Manual assembly → Tube; SMT auto‑line → Tape & Reel with pick‑up Cap
5. Soldering process: Wave soldering for DIP; SMT reflow needs high‑temperature‑resistant insulator material
6. For cross‑brand replacement: Send the original brand part number; we will check dimension & electrical match for you
7. Contact our engineering team if you have special dimension or drawing requirements

FAQ

Q: What's your MOQ?

A: Our MOQ usually comes to 1000 pcs, but we accept small order quantities for testing.

Q: Can I visit your factory?

A: Welcome to visit our factory, and we will show you our professional production process. We hope we can have long-term cooperation with you.

Q: What's your sample time? What's your delivery time?

A: 7 days for samples, and 15-20 days for mass production. It depends on the quantity.

Q: How do I inspect my goods? 

A: You can inspect by visiting the factory, or ask a third party to inspect, or by picture inspection.

Q: How much does it cost to ship to my country?

A: The freight will be quoted by the freight company based on your Gross Weight and CBM.

Q: How do I know if you ship out my order?

A: The tracking number(DHL, UPS, FedEx, TNT, EMS, etc.), Air Waybill, or B/L by Sea will be sent to you as soon as your goods are shipped out. We also follow up on the delivery and keep you informed. 

Q: Can I make personalized/customized products?

 A: Sure, just send us your drawing or sample.